Ethernet Cable Pinout Diagrams
Below are shown the pinouts of different ethernet cabling. Ethernet
connectors are of type "RJ45"; an eight (8) connector jack. The pins are
numbered from one (1) to eight (8), left to right when looking at the top
of the connector.
Crossover and Straight Through Pinouts
The table below describes the pinouts of both straight through and
crossover Ethernet cables. Keep in mind that pinouts are described for
botht the left and right side of the cable.
Straight Through Cabling Pinouts
| Left Pin |
Left Signal |
Right Pin |
Right Signal |
| 1 |
Tx+ |
1 |
Rc+ |
| 2 |
Tx- |
2 |
Rc- |
| 3 |
Rc+ |
3 |
Tx+ |
| 4 |
GND |
4 |
GND |
| 5 |
GND |
5 |
GND |
| 6 |
Rc- |
6 |
Tx- |
| 7 |
GND |
7 |
GND |
| 8 |
GND |
8 |
GND |
Crossover Cabling Pinouts
Many times this cable type is not needed. Many devices now have
intelligent switching to internally switch pins for proper
connectivity
| Left Pin |
Left Signal |
Right Pin |
Right Signal |
| 1 |
Rx+ |
3 |
Tx+ |
| 2 |
Rc- |
6 |
Tx- |
| 3 |
Tx+ |
1 |
Rc+ |
| 4 |
GND |
4 |
GND |
| 5 |
GND |
5 |
GND |
| 6 |
Tx- |
2 |
Rc- |
| 7 |
GND |
7 |
GND |
| 8 |
GND |
8 |
GND |
Ethernet Cabling Colors
| |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
| EIA/TIA 586A |
W/G |
G/W |
W/O |
Bl/W |
W/Bl |
O/W |
W/Br |
Br/W |
EIA/TIA 586B
AT&T 258A |
W/O |
O/W |
W/G |
Bl/W |
W/Bl |
G/W |
W/Br |
Br/W |